How to clean your spray can tips

How to clean an evaporative cooler

What You Need An evaporative air cooler is something that you always need to keep an eye on and clean up. You will find that the more you can keep it clean and treat it with proper maintenance and cleaning, the longer it will last and the better it will work. Materials Required: Hose with Spray Tip Scrub Brush Step 1 - Open The first thing you need to do is get your air cooler open.


What you need

An evaporative air cooler is something that you always need to keep an eye on and keep clean. You will find that the more you can keep it clean and treat it with proper maintenance and cleaning, the longer it will last and the better it will work.Materials Needed: Hose with Spray NozzleScrub BrushStep 1 - Open The first thing you need to do , is to get your air cooler open. Every air cooler is different unless you had to open it up before looking at the instruction manual to see exactly how to do it. Failure to do so could damage the evaporative air cooler. Step 2 - Inspection After opening the cooler, it is a good idea to take out the pads and inspect them carefully. If they are in good shape with no buildup or mold, they do not need to be replaced. Make an assessment before proceeding to the next step. If you need to replace them make sure you are getting the correct measurements so the size you get is one that you can use. Step 3 - Float Valve Take a good look at your float valve and make sure it is not sticky at all. If you notice it is then you need to get it cleaned. Most of the time, you will find that hard water debris and debris are the main reason you have problems with it. If you don't think cleaning can fix the problem then this is something you might consider when replacing everything together. Step 4 - Tape Make sure you check the belt on your fan. It can't be very loose as this could cause something. Make sure it's nice and firm and only moves slightly when pushed. If the belt moves too much it will need to be replaced. Step 5 - Oil It's a good idea to oil the engine parts to make sure they can run smoother and longer, not to say quieter. Step 6 - Clean After you have the After checking, you can start cleaning. You will begin by taking the pan out and scrubbing until all of the hard water buildup is gone. Make sure they are all gone before putting it back. Look inside and make sure there isn't a very large amount of large debris anywhere if it is then scrubbed away until it is all gone. Once you are done, all you have to do is replace the necessary parts and put them all back together.

A Evaporative air cooler you will always need to keep an eye on and clean, you will find that the more you can keep it clean and treat it with proper maintenance and cleaning, the longer it will last and the better it will work.

Step 1 - Open

The first thing you need to do is get your air cooler open. Every air cooler is different unless you had to open it up before looking at the instruction manual to see exactly how to do it. Otherwise the evaporative air cooler could be damaged.

Step 2 - inspection

After opening the cooler, it's a good idea to take out the pads and inspect them carefully. If they are in good shape and not showing any buildup or mold, they do not need to be replaced. Make an assessment before proceeding to the next step. If you need to replace them make sure you are getting the correct measurements so the size you get is one that you can use.

Step 3 - float valve

Take a good look at your float valve and make sure it isn't sticking at all. If you notice it is then you need to get it cleaned. Most of the time, you will find that hard water debris and debris are the main reason you have problems with it. If you don't think cleaning can fix the problem then this is something you might consider when replacing everything together.

Step 4 - tape

Make sure to check the belt on your fan. It can't be very loose as this could cause something. Make sure it's nice and firm and only moves slightly when pushed. If the belt moves too much, it must be replaced.

Step 5 - oil

It's a good idea to oil the engine parts to make sure they can run smoother and longer, not to say quieter.

Step 6 - cleaning

After you've checked, it's time to start cleaning. You will begin by taking the pan out and scrubbing until all of the hard water buildup is gone. Make sure they are all gone before putting it back. Look inside and make sure there isn't a very large amount of large debris anywhere if it is then scrubbed away until it is all gone. Once you are done, all you have to do is replace the necessary parts and put them all back together.

Videos Related Articles: For Smokers and Ex-Smokers Too - A drink to cleanse the lungs.

Home Other How To Clean An Evaporative Cooler