How to Install Wicker Tile Backsplash

How to work with glass tiles

Home improvement 2021

In this video, the tile builder Joe Ferrante explains how to work with Glaflieen. Steps: 1 Mix the Thinet mortar and apply a thin spatula to the baking sheet.


In this video, tile maker Joe Ferrante explains how to work with glass tiles.


1 Mix the thinset mortar and spatula a thin spatula onto the backsplash wall.
2 Smooth thinset with smoothing trowel and wet sponge; Let dry.
3 Place the 12 x 12 inch tiles on the countertop.
4 Measure the length and height of the backsplash wall to determine the tile layout.
5 Spread the Thinset on the wall with a straight spatula.
6 Press the entire sheet of tile into the thinset.
7 Cut individual sheets of sheet metal to fit electrical outlets.
8 Continue placing the panels over the backsplash wall.
9 Use the undercut saw to trim the window stool so the tile is behind the bezel.
10 Use a tile cutter to trim so that each tile fits snugly around the socket.
11 Spread the yarn on the back of each tile and press it against the wall. Use spacers to create even joint joints.
12 Use wet saw to trim tiles along the top of the backsplash wall.
13 Once all of the tiles are in place, allow the thinset to harden.
14 Finally, use a rubber float to press mortar into the spaces between the tiles. Wipe off any excess grout with a clean, damp sponge.

Previous article

How to make your home smarter

The Lutron Mart Bridge (US $ 120) is soldering as the brand's Erena remotes (starting at around US $ 349) open when you arrive at home or close after closing ...

Next article

In memory of Austin Wilson, 1999-2018

Team TOH is sad about the death of our Wilon generation, Autin Wilon. He died in sleep in January 2018. It was an honor to work with him and he became an important ...