How to see the CPU temperature in the game

Windows 10: This is how you measure the CPU temperature

HOW CAN I DETECT MY COMPUTER'S HARDWARE FOR ERRORS ...

You should always keep an eye on the temperature of your CPU. Because overheating is fatal for processors and the energy consumption increases significantly as a result. We show you how to measure the CPU temperature with the help of the freeware tools Core Temp and HWMonitor.

  1. Display CPU temperature with Core Temp
  2. Display CPU temperature with HWMonitor
  3. Read out the CPU temperature via the command line

Whether you have overclocked your processor with the help of the BIOS, installed a new CPU fan or just want to optimize the battery life of your notebook. The CPU temperature plays an important role in all three scenarios. Because too much heat not only affects the service life of your computing chip. The energy consumption is also significantly higher as a result.

Intel and AMD usually give values ​​between 90 and 100 degrees Celsius for their CPUs as the maximum temperature. However, this limit should not be exhausted or only in exceptional cases. As the maximum target value in continuous operation, values ​​of 60 to 70 degrees are optimal and ideally even lower in notebooks so that the battery lasts as long as possible. With the free tools Core Temp and HWMonitor you can display the CPU temperature under Windows 10.

Display CPU temperature with Core Temp

Display CPU temperature with HWMonitor

That's how it's done

  1. 1

    HWMonitor also shows the CPU temperature along with further details about your processor.

  2. 2

    HWMonitor also queries any temperature sensors installed on your motherboard. So you can see at a glance whether there are any problems with your fans. It is possible that these have not been chosen optimally.

Read out the CPU temperature via the command line

Sometimes you will also find information on the Internet that you can read out the CPU temperature via the Windows command line. All you have to do is supposedly to run the Windows command prompt as administrator and then the command wmic / namespace: \ root \ wmi PATH MSAcpi_ThermalZoneTemperature get CurrentTemperature enter. Then you get a value that you have to divide by 10 and thus get the CPU temperature in Kelvin.

Top 100 Freeware Software: An overview of the best free programs
Top 100 Freeware Software: An overview of the best free programs

We tested the procedure, but only received an error message. Further research has shown that the command probably only works on some computers. If you don't want to install any freeware, you can try it out. Feel free to leave us a comment as to whether the command was successful for you.

" Tip:The best VPN providers for more security and data protection